Digital 4 in1 Soil PH Tester Water Moisture Light Sunlight Test Meter For Garden Plant Flower Acidity Moisture Measurement Tools

Four kinds of function

â‡1. measuring light intensity of the current environment:

Low, low, low +, NOR-, NOR+, HGH-, HGH, HGH+

⇠2. Measure the soil moisture content:

Dry, dry, wet, wet +

3. Measurement of soil temperature:

Temperature measurement range :-9~+50℃(16~122℉).

4. Measure the pH of the soil

PH measurement range :3.5-9.0

Why we were chosen:

Large screen display data, use more intuitive and convenient.

The results can be measured quickly in 3 seconds without waiting.

Exquisite workmanship, humanized design, durable quality, easy to carry the whole machine.

Four modes: one-button switching, sensitive sensing,

Accurate measurement of different types of readings, etc.

Usage:

Step 1: Switch to wet/temperature/light or pH/light positions as required.

Step 2: Insert probe into approximately 2-4 inches of soil.

Step 3: Check the humidity /pH/ light/temperature level in the dial after 3 seconds.

Step 4: Remove the probe from the soil and wipe it clean after each use.

Packaging includes:

1 * 4 in 1 Soil Survey Instrument(Not include battery，9V battery is required)

1 * User Manual

2 Need 9V battery

After using for a period of time, the screen only shows a green screen without displaying numbers,which means that the battery is dead.

3 Water very dry land first When， the soil is too dry, please wet the soil first and then test it.

4 Wait for a while If the soil is too dry and fertile, sprinkle some water and test again after half an hour.

Special Tips

Please read these before using!

1. Don't use it to test liquids. Used to test soil only.

2. After using it for a period of time, the screen will only show the green screen instead of the number,

That means the battery is dead. (There is no need to worry about damage to the instrument, Just replace it with a new battery.)

3. When the soil is too dry, wet it first and then test it.

4. If the soil is too dry and fertile, sprinkle with water and test again half an hour later.

Don't use it to test any kind of liquid. It can only be used to test soil.

3-in-1 Soil Tester Tool Moisture, Light and pH, Soil Hygrometer Sensor for Garden, Farm, Indoor & Outdoor (No Batteries Required)

3-in-1 Design

This 3-in-1 soil moisture meter is designed to better know the condition of your plant, detect soil moisture, help you know the pH value of the soil, determine if plants get enough sunlight to keep plants grow healthier !

Measure Soil Moisture

Help you specialize in grasping when you need to water your plant(1-3 Dry, 4-7 Normal, 8-10 Wet)

Measure Sunlight Level

Know about whether it gets adequate sunlight(0-200 Low, 200-500 Low+, 500-1000 Normal, 1000-2000 High)

Measure the pH of the Soil

Help you to control the pH value in the soil(3.5-6.5 Acidic, 7-8 Alkaline)

Watering Guide Notes:

The ranges listed in the plant watering guide indicate that if the meter reads above the listed range, it is too early to water your plants.

If the meter reads the same or lower than the listed range, the plant needs watering.

Watering plants scientifically and rationally to make plants grow better.

Tips:

1.Do not use it to test very hard soil.

2.Do not leave it in the soil for long periods of time.

3.Never use it to test water or other liquid. Designed for testing soil only.

4.After use, please wipe clean the soil moisture probe.